|
Post by BONEZY on Apr 18, 2014 20:11:13 GMT 10
Hi guys I'm chasing a 04 750. Shadow workshop manual I have tried few of the links not much luck is all.
and started doing the clutch kit as old one ten years old and took 4 clutch springs off and on all other models that gives you access to clutch plates you know but not this model it looks like either the centre nut on shaft to gearbox has to come off or there is a trick or special tool but any help would be very appreciated only from guys who have 04 model 750 or know for sure what inside of one looks like please guys thanks heaps.
|
|
|
Post by dazza423 on Apr 18, 2014 20:27:40 GMT 10
Hi Bonezy try youtube there are some vids on there. I think there is a tool that you need as well. hope this helps. Cheers Dazza
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 18, 2014 21:42:49 GMT 10
once you remove the 4 bolts and the plate that covers the springs you will have access to a large nut in the middle of the clutch basket. You need to remove this nut which will spin around, Be careful getting it of as you don't want to break anything on the clutch basket. I have used an air impact gun in the past if you don't have the tool they use, make sure you use a thread lock when you put it back on.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 18, 2014 21:54:54 GMT 10
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 19, 2014 8:47:29 GMT 10
Try Honda aero750.com yank site has all mods for that year and more.
|
|
|
Post by BONEZY on Apr 20, 2014 9:09:56 GMT 10
Thanks Shane tried it with out the tool they say to use its on there good . Just ordered the tool for $30 bucks cause plan on doing rebuild one day any ways so may as well have all the tools. Cheers again guys great bikes to work on .
|
|