|
Post by hedevil (max) on May 10, 2015 6:35:34 GMT 10
Could anyone please tell me what the vt400 2013 model is also known as in other countrys as a lot of the accesories dont relate to the Australian model Thanks
|
|
|
Post by SPINAL on May 10, 2015 8:13:51 GMT 10
Could anyone please tell me what the vt400 2013 model is also known as in other countrys as a lot of the accesories dont relate to the Australian model Thanks when ordering parts for your vt400 search for vt750 aero 2004 and up they will fit your model. cheers, spinal.
|
|
|
Post by michaelangelo on Jan 30, 2020 22:40:11 GMT 10
How about the electronics? I installed 4 LED AMBER indicator bulbs and they all flash together if I install three but when I install the forth the dont flash at all... need a LED INDICATOR RELAY so searching fo VT400 2011 model comes up dead end
|
|
|
Post by Sim on Jan 31, 2020 4:28:28 GMT 10
Yes, you will need a led relay. You will also need to put a diode on two legs of your indicator dash light. the problem is both circuits are connected together (strangely enough). Took me a while to figure that out. This way you don't need load resistors, and you save power consumption.
|
|
|
Post by michaelangelo on Jan 31, 2020 8:17:48 GMT 10
Ok so I am now looking at a new relay box for LED's. Do I still put in the diodes?? Ahh. No one mentioned also having to put the diodes in. Interesting
|
|
|
Post by Sim on Feb 3, 2020 19:23:26 GMT 10
Yep, still put the diodes in. Yeah, I managed to stumble upon it for a different model and then checked the circuit and realized it was the same daft circuit!
Let us know how you get on!
|
|