|
Post by kingy on Feb 19, 2011 16:27:47 GMT 10
hay guys
installed my grips with the glue that was included in the packet... which were installed on wed last week.. went for a ride today and both grips are coming off... any ideas on other glues or things i can use... need to sort it out asap going away on trip soon..
|
|
|
Post by Steve on Feb 19, 2011 16:30:53 GMT 10
Ok help is at hand
I was doing 80kph when my throttle grip came all the way off, mate wondered what had happened when Iwent wobbling down the road. Easy fix, is one layer of electrical tape over bar, and gel grip glue from selley's fixed mine all up. the superglue just did not work for me
Steve
|
|
|
Post by kingy on Feb 19, 2011 19:40:28 GMT 10
well i just gave it a shit load of hairspray as i have heard that works... if not a trip to bunnings tomoz will be a must.. scared the shit out of me.. heading down beauy road at 100ks and going wtf..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 19, 2011 21:42:02 GMT 10
Could be a theme for a song there kingy,
|
|
|
Post by kingy on Feb 20, 2011 16:05:43 GMT 10
ok well i used hairspray and they came back off again... so i wraped bars in electrical tape and used TARZAN GRIP GLUE SUPER STRENGTH.. fingers crossed this holds
|
|
|
Post by Bad Penny Customs on Feb 20, 2011 21:33:20 GMT 10
If not, make sure you clean off all the excess glue etc from the throttle sleeve. Give it a sand with some rough sandpaper and then glue it. I'd say the glue hasn't been bonding with the throttle sleeve.
|
|
|
Post by kingy on Feb 21, 2011 8:36:39 GMT 10
both side penny have come undone.. and what i noticed today when i walked past is that the rubber inserts are comining off the fuking grip... ahhhhhh i might install my OE ones back as my bike gets picked on thursday
|
|
|
Post by kingy on Feb 23, 2011 21:04:16 GMT 10
what are those cruise control palm things called ? and will they fit over my iso
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2011 21:24:06 GMT 10
Have a good look in the pics i sent you mate. There is a close up with the name on it,Crampbuster.About $14 most m/cycle stores
|
|
|
Post by kingy on Feb 23, 2011 21:25:34 GMT 10
yeh thats what i want.. but will they fit over the ISO
|
|
|
Post by Bad Penny Customs on Feb 23, 2011 22:01:06 GMT 10
|
|
|
Post by kingy on Feb 23, 2011 22:07:15 GMT 10
penny i am not touching those fuking grips again
|
|
|
Post by Bad Penny Customs on Feb 23, 2011 22:14:29 GMT 10
It's just 4 bolts to undo. Then you add on the throttle boss, put the end cap on and then insert the 4 new (longer) bolts. Piece of cake.
|
|
|
Post by kingy on Feb 23, 2011 22:21:04 GMT 10
nah i will just buy a uni one bro
|
|
|
Post by Bad Penny Customs on Feb 23, 2011 22:24:41 GMT 10
lol, fair enough.
|
|