|
Post by tommo on Apr 13, 2011 16:50:56 GMT 10
OK Dudes,
My first question.
I really like the VT750C2 (Newer model) but understand that it only comes in EFI? Is that right?
If so, what (if anything) needs to be done to the bike before/after installation of some loud pipes?
I know with a carby you need to re-jet and a new air-intake will be handy, but whats the go with electronic fuel injected???
Does the ECU need to be remapped/replaced?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 13, 2011 18:28:11 GMT 10
Simon is your man here mate .Give him what you would like to know about that and he will be able to sort you out better than us mere mortals. ;D ;D Basically from how he decribed it once if you are going to do pipes ,do the air intake and put on a power commander to be able to get it mapped properly. There is a thread here somewhere covering this topic will try to find for you .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 13, 2011 18:31:04 GMT 10
Ok tommo go to the 2nd page here in bike talk and click on this ; Topic: Question !!!!!! filter . Should help mate Cheers Ray
|
|
|
Post by kingy on Apr 13, 2011 20:23:06 GMT 10
i would rather tinker with a carby then a ECU .... thats what made me go for the caby version even tho the EFI was only 1500 bucks more
|
|
|
Post by Bad Penny Customs on Apr 13, 2011 20:58:55 GMT 10
EFI is more expensive to change (ie. requires a fuel manager) but the results are a lot better and are more easily changed (just connect to a computer and re-map the fuel manager).
|
|
|
Post by tommo on Apr 14, 2011 11:18:47 GMT 10
Sounds good guys. Might just go with standard fuel management until I get the urge to change it.
Will def be finding a set of pipes for it soon though. Know any good places in Aus to get them.
Anyone got a hypercharger on a fuel injected bike? Can it be done?
|
|
|
Post by Bad Penny Customs on Apr 14, 2011 14:00:24 GMT 10
Hyperchargers on FI bikes are very easy as it's a case of unbolt the stock air box and bolt on the new one.
|
|
|
Post by kingy on Apr 14, 2011 14:38:00 GMT 10
and being in vic it gets cold.. i know this i was just down there.. and first time ever in my bikes life every morning i had to start it with a choke on. for 2 min otherwise it would stall
|
|
|
Post by tommo on Apr 14, 2011 15:20:08 GMT 10
Haha, tell me about it... Dad's restoring an EH Holden, and coming into these colder months she is going to struggle a bit...
Hey Bad Penny, do you have a Hypercharger? And do you stock them to fit a late model 750C2?
Thanks for your time guys
|
|
|
Post by kingy on Apr 14, 2011 15:31:15 GMT 10
simon has got anything/everything... you what shit on a stick i bet he could supply it.. thats how good simon is
|
|
|
Post by tommo on Apr 14, 2011 15:33:25 GMT 10
Wicked!
How do I get onto Simon?
|
|
|
Post by kingy on Apr 14, 2011 16:28:41 GMT 10
PM him mate... Simon = bad penny lol
|
|
|
Post by tommo on Apr 14, 2011 16:30:56 GMT 10
Oh, haha.
Cheers
|
|
|
Post by Steve on Apr 14, 2011 20:10:50 GMT 10
Simon, you must have him on commission
|
|
|
Post by Bad Penny Customs on Apr 15, 2011 1:13:53 GMT 10
Simon, you must have him on commission not yet
|
|