|
Post by zombielovechild on Sept 24, 2013 19:36:44 GMT 10
these are damn comfortable , if you're contemplating floorboards but dont want to readjust your foot position these babies are perfect. and Benimo i would recomend these highly . but now for the blow by blow 1. there is a split pin on the underside of the peg that feeds through the main bolt. Straighten this and pull it out of the bolt (don't loose it) 2. give the main bolt a light tap to remove it and hold on to the washer (you'll need it later) 3. remove the peg and be prepared for the spring that will inevidably pop out 4. adjust pegs by loosening the alan key bolt on the side of the peg and the stirrup by using a wrench 5 once they're in the position you want tighten everthing up and put them into place in the peg cradle. 6. feed the main bolt back through the new pegs 7. place the washer back on the underside of bolt (and outside of bolt cradle) 8. feed the split pin back through the hole of the main bolt and bend back into shape around the main bolt 9. enjoy your new pegs i will put up more pics of the process soon
|
|
|
Post by zombielovechild on Sept 24, 2013 19:38:00 GMT 10
|
|
|
Post by zombielovechild on Sept 24, 2013 19:38:58 GMT 10
|
|
|
Post by bdrgonzo on Sept 25, 2013 6:51:16 GMT 10
You do know I will need to look and try the feel of those now.
|
|
|
Post by zombielovechild on Sept 25, 2013 8:13:16 GMT 10
You do know I will need to look and try the feel of those now. Of corse my friend , wouldn't have it any other way
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 25, 2013 18:22:47 GMT 10
Very cool Zombie, and thanks for the step by step .. very handy I was wondering how they matched in with your theme then looked at the bigger pic .. well done .. subtle
|
|
|
Post by zombielovechild on Sept 25, 2013 21:22:59 GMT 10
Very cool Zombie, and thanks for the step by step .. very handy I was wondering how they matched in with your theme then looked at the bigger pic .. well done .. subtle Thanks Annastasia , I fugues I owed it to you guys to do a step by step for all the help I've gotton on here
|
|