|
Post by kingy on Nov 6, 2010 13:57:54 GMT 10
i found it very helpful. as i plan to do this mod in the next couple of weeks...
|
|
|
Post by Bad Penny Customs on Nov 8, 2010 0:37:27 GMT 10
Just a tip. If your not planning on re-using the stock grips, just use a stanley knife to cut down the length of the rubber grip and just peel it off. This prevents you accidently damaging your switch blocks with the screw driver. Before anyone asks, yes it does happen a bit and ends up in the person buying new switch blocks or switch block housings. If you use the screw driver on the throttle side you could accidently break the throttle sleeve.
|
|
|
Post by kingy on Nov 8, 2010 9:24:44 GMT 10
ahhhhh true true....
|
|
|
Post by Steve on Nov 8, 2010 13:41:02 GMT 10
dont trust that glue
use contact gell
Dawg
|
|