|
Post by roger on Nov 30, 2010 21:39:08 GMT 10
I bought this dual holder on Ebay. It is stainless steel, I think from memory it was about $50 BFN Roger. Attachments:
|
|
|
Post by Clarry on Nov 30, 2010 23:41:46 GMT 10
Thanks Roger, I have seen them & they are nice, but they're $72.00 delivered. Will have to give it some thought.
|
|
|
Post by roger on Dec 1, 2010 6:35:26 GMT 10
Sorry about getting the price so far out, I've had mine about two years so I did take a bit of a guess at it. There are very sturdy and well made, it is a bit of messing around to change the registration sticker though as you have to take it all apart, 6 screws using an allen key and you must hold the locknuts behind or they just spin around. The perspex sticker cover really holds on to the registration label and took a while to remove it without scratching it. Maybe that was caused more by the sticker as sometimes they just come off the car windscreen and sometimes they need "chiseling" off! I will see how the next one goes next July Cheers Roger.
|
|
|
Post by bear750 on Dec 1, 2010 7:26:00 GMT 10
For what it's worth, up here in the snow covered Emerald Is they call the rego sticker a tax disc. I have it mounted on the left hand side using the seat alen head bolts. cheers Bear
|
|
|
Post by Bad Penny Customs on Dec 1, 2010 10:02:45 GMT 10
I used to mount my rego sticker / tax disc using the lower shock bolt on the left side of the bike.
|
|
|
Post by scrap on Dec 1, 2010 21:44:06 GMT 10
I used to mount my rego sticker / tax disc using the lower shock bolt on the left side of the bike. ...same here, but took it off when the rules changes and we don't need to display one in WA
|
|
|
Post by highwayrunner on Dec 3, 2010 23:47:23 GMT 10
Just to throw my 20 cents worth in, when I got my new rego sticker from Qld tpt, it had on the back of the form that the tubes were not legal to use up here. Naturally, there are plenty of them around.
When I got Rory, her label too was bolted to the bottom of the rego plate, then one day when she came back from a service, the label was bolted to the radiator mount bracket. It's a b**ch to have to change it, but I only need to do it once a year.
Brian'
|
|
|
Post by Clarry on Dec 4, 2010 9:39:12 GMT 10
I used to mount my rego sticker / tax disc using the lower shock bolt on the left side of the bike. ...same here, but took it off when the rules changes and we don't need to display one in WA How mixed up is that. In other states you get fined or warned for not using the standard flat holder and in WA you don't need to display it at all. Black no white, no grey area there.
|
|