|
Post by john53 on Sept 1, 2016 17:05:32 GMT 10
Hi, I have decided that I need to add another speedo to my VT750. I find the original speedo very difficult to read especially if riding though a section of road with low speed corners. It is made worse by the fact that I wear a flip-face helmet which is thicker in the chin area.
Has anyone out there fitted a speedo to the handlebars or any advice on the best type to try?
I know some of you out there will say that you dont need to know what speed you are doing but I like to know my actual speed compared to the advised speed.
|
|
|
Post by rabs on Sept 3, 2016 9:15:12 GMT 10
I bought a tachometer from eBay and noticed lots of speedo's as well, there are some nice led ones i thought would be suitable
|
|
|
Post by rabs on Sept 3, 2016 9:17:09 GMT 10
Just as an afterthought anyone know where to connect the signal wire for a tachometer
|
|
|
Post by dg6oo2 on Sept 3, 2016 21:21:17 GMT 10
You may be able to adapt a speedo and bracket off an 1100 sabre as I think that one sits above the handlebars, there may also be a vt750 with the same setup.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2016 22:23:27 GMT 10
You may be able to adapt a speedo and bracket off an 1100 sabre as I think that one sits above the handlebars, there may also be a vt750 with the same setup. The 750 s or RS has them up top .
|
|